Technology

GEORG supplies new hybrid cut-to-length line to Alfun

Since 2015, Alfun has been operating a cut-to-length line from GEORG for 0.3 to 3.0 mm thick and up to 2,000 mm wide strip. This machine can cut sheets of up to 6,000 mm in length.

In the course of permanently increasing order intake, investments were made in a new hybrid cut-to-length line. 
Due to the excellent experience with and durability of the first GEORG machine, management at Alfun again decided in favor of GEORG as the machine supplier. It is designed for top performance: The highly automated machine side-trims and cuts to length aluminum strip of up to 2,300 mm and stainless steel strip up to 2,050 mm wide at processing speeds of up to 60 m/min.

Click here for the case study by Martin Sklenar, Project Manager at Alfun a.s. Metal Service Center, Bruntál, Czech Republic and Tom Giebeler, Sales Manager Finishing Lines at GEORG in Kreuztal:

Read more
 

Insights
[Translate to Englisch:]

The GEORG team congratulates MCB to the companies 80th anniversary!

With great esteem we look upon the successfuf development for so many years. For sure this is not self-perpetuating but it is based on people who proceed with courage, persistance, power to innovate and enthusiasm.

We are grateful that we could contribute a little bit to such success with our products and services. Also in the future we will stand by side MCB as their reliable partner.

Customer & Orders
Technology

Two slitting lines are upgraded with automatic separation systems.

Tata Steel "Multisteel" has commissioned us to equip two slitting lines with automatic separating systems. We are very pleased about this retrofit order, which brings many advantages for the operation of a slitting line with our patented positioning system for separating discs.

Thank you Tata Steel "Multisteel for your trust.

Customer & Orders, Services
Insights

Successful Factory Acceptance Test for GEORG precisioncut hybrid cut to length line

The MCB project team visited GEORG to inspect the assembled and pre-tested aggregates for the new DE005 for MCBs plant in Valkenswaard.

After the delivery that is to be finished in January, the construction site will start at MCB.

We will give you further insight into the delivery and installation of the machine here on LinkedIn over the next weeks, so keep your eyes open.

Customer & Orders
Technology

Elval launches order for a new GEORG High Speed Edge Trimming Line

In order to double the annual production capacities, Elval, one of the world leading producers of flat rolled aluminum is investing again in GEORG equipment.

In the last few years the Greek aluminum specialist bought a drum shear, a slitting line and two roll grinding machines from the German machine supplier and process optimizer. Now, the company placed a new order for a high-speed Edge Trimming Line made by GEORG. On this line Elval can produce aluminium strips from 0.15 – 0.70 mm. The speed is max. 1650 m/min. With approx. 400.000 tons/year the new line supports Elval on the way to double the annual production output.

We are pleased about the renewed trust and the expansion of the existing partnership.

Customer & Orders
Technology

GEORG delivers roll grinding machine to long-term customer and partner Erdemir

Due to the modernization of the hot strip mill, GEORG customer and partner Erdemir needed a new roll grinding machine to process the rolls.

The GEORG Ultragrind 25 wasn't just chosen because of the most modern control system available on the market, GEORG smartcontrol. By optimizing the system together with specialists from Erdemir, the machining times of HSS rolls was halved in contrast to already available systems.

Customer & Orders
Insights

Second GEORG Roll Grinding Machine for Elval successfully pre-accepted

The Greek company ElvalHalcor, one of the world's leading manufacturers of flat rolled aluminum, has recently successfully pre-accepted the second GEORG roll grinding machine.

GEORG was already allowed to deliver a roll grinding machine and a slitting line to Elval in 2019 and 2020. The new grinding machine of type GEORG ultragrind 10 was delivered in a very short time, it is equipped with the in-house GEORG smartcontrol, one of the world's leading control systems.

We are pleased about the good partnership and are excitedly looking toward the future!

Customer & Orders
GEORG experience

Thomas Weber

Thomas Weber
Head of Customer & Business Partner Relations

Make contact

top