Tooling

The tooling an all GEORG TBA lines is activated by a latest technology servo motor.
Shortest cutting times during shearing and punching are achieved with the latest generation of drive techology and the GEORG cut control system.
Line maintenance is reduced.

Two high speed electric shears.
One fixed at 45 deg and one adjustable 45/90.
For all line sizes TBA400 to 1000.

High speed electric Swing shear with drive 2 for flexible production of laminations for power transformers.
For TBA1000 lines.

Swing shear lines impress by highest flexiblity in their cutting sequence. Even more complex selections can be cut and subsequently stacked in the right order.
For example power transformer cores consist of many center leg Laminations; when cut on fixed shear lines they can only be produced in combination with a V-notch. However GEORG swing shear lines cut these sheets without V-notch thus avoiding the occurence of sheet hairs and off-set cutting edges.

V notch with two CNC longitudinally adjustable hole punching units for fast production of step-lap cores.
For lines TBA400 to 600.

V notch with two cross-adjustable hole punching units.
For lines TBA600 to 1000.

4 tip electric cutting shears with two cross- adjustable hole punching units.
For lines TBA600 to 1000.