|
Function
The recoiler is provided to rewind the trimmed strips or slit strands under constant
tension with straight edges on a common expandable rewind mandrel
- recoiler for coil weights from 5 to
40 t.
- strip widths from < 10 mm to
2400 mm and above
- for several coil inner
diameter from 406 mm , 508 mm,
610 mm to 750 mm or
further
- clamping of the single strips
via clamping chase, on sleeve or
winding via belt
wrapper
- coil inner diameter via replaceable
top segments, rubber sleeves,
recoiler mandrels and interchangeable
head support with automatical hydraulical
shaft clamping, connectable flange shafts
- above
20 t with outboard bearing and rolls
- for
various strip speeds from 60 m/min
up to 1200 m/min
- recoiler drive in AC
and DC technology
|
